23
EN
Problem
Possible cause
Solution
Over
fl
ow.
A wrong function was selected. Select a correct function.
Installation was incorrect or the
perforated
fl
ow cup was not
installed into place.
Make sure that the perforated
fl
ow cup is correctly installed.
Soymilk is too diluted or too
many beans are added.
Put proper quantity of ingredient
as instructed in the “Use the
appliance” section.
The water level is above
上水位
(the maximum level
indication) or below
下水位
(the minimum level indication).
Make sure that the water level is
between
上水位
(the maximum
level indication) and
下水位
(the minimum level indication).
The appliance is broken.
Contact the Philips Consumer
Care Centre.
The over
fl
ow sensor is not
cleaned.
Clean the over
fl
ow sensor.
The time taken to
process soymilk
is longer than
instructed, but other
functions work well.
The voltage is too low.
Use a household power regulator.
The water temperature is
too low.
Add warm water no hotter
than 70
℃
.
Food is burnt.
A wrong function is selected.
Select a correct function.
The inner side of the chamber
was not cleaned.
Clean the inner side of the
chamber.
Insuf
fi
cient water is added.
Make sure that the water level is
between
上水位
(the maximum
level indication) and
下水位
(the minimum level indication).
Too much ingredient is added.
Put proper quantity of ingredient
as instructed in the “Use the
appliance” section.
