Philips HD 8930, Service Manual

Page: 45 / 54

NEW ROYAL 07 DISASSEMBLY
Saeco International Group Rev. 00 / July 2011 Page / 09
06
7.13. Solenoid valve assembly
Loosen the screws as illustrated and slide out the card sup -
port to access the solenoid valve assembly more easily.
Loosen the screws under the
front body cover as illustrated.
Disconnect the electrical and water
circuit connections.
Loosen the screws on the support.
To remove the discharge valve (A) as illustrated
firstly loosen the screws which hold the boiler
pin cover in place then remove it.
Loosen the screw under the
machine as illustrated.
Disconnect all electrical and water
circuit connections.
Remove the front body cover as follows:
- Loosen the screw (A) as illustrated
- Move the cover to the left to release the catches (B)
- Lift the lower part of the cover to release the catch
(C)
- Pull outwards
7.12. Relief valve
A
A
B
C