Philips HD 8930, Service Manual

Page: 41 / 54

NEW ROYAL 07 DISASSEMBLY
Saeco International Group Rev. 00 / July 2011 Page / 09 02
To slide out the upper grinder support turn the nut (A)
anticlockwise until it is released.
Lower grinder (1) and
upper grinder (2).
7.3. Grinder blades
Loosen the screw as illustrated and slide out the lower
grinder. When re-assembling take care to replace the
three springs and three balls correctly.
When reassembling the adjusting lever (1)
position it in the center (2) and tighten the
screw as illustrated.
To adjust the distance between the grinders
- reconnect the coffee grinder and switch on
- turn the adjusting ring (A) slowly clockwise until the two
grinders touch each other
- turn the adjusting ring (A) anticlockwise one notch.
Release the upper grinder lid by pressing
on the fins as illustrated (A) and remove
the grinder by unhooking the catches as
illustrated (B).
A
A
1
2
A
B
1
2