Philips HD 8753, Service Manual

Page: 47 / 61

INTELIA 07 DISASSEMBLY
Saeco International Group Rev. 01 / September 2011 Page / 11
04
The grinding adjustment can be set by the user (only with the coffee grinder in operation) by
pressing and turning (only by one click at a time) the insert inside the coffee bean hopper with the
aid of the wrench supplied.
1) Loosen the screws holding the front plate to the upper plate
2) Remove the front plate, pressing it in the center and pulling the side walls outward
3) Remove the board support assembly
4) Loosen the screws holding the solenoid valve to the upper plate
5) Disconnect all electrical and water circuit connections
Adjustment by a service center
7.5. Coffee grinder adjustment
7.6. Intelia Cappuccino three-way solenoid valve
+
-
+
-
C
1
2
3
4
4 5
To adjust grinding further, the engineer can work directly on the coffee
grinder by pressing and turning the ring nut (C) shown. (clockwise + to
increase the particle size of the coffee and anticlockwise - to decrease it).
If there are any remains of coffee powder between the two grinding
blades it is recommended to tighten by max. two marks at a time.
Lastly, move the arrow (A) on the adjustment knob to the center of the
adjustment dots on the cover (B).