Philips HD 8753 Service Manual Download Page 38 | Manualshive

Page: 38 / 61

background image

INTELIA 05 TROUBLESHOOTING

Saeco International Group

Rev. 01 / September 2011

Page / 11

5.2.

SteamOut

This procedure is carried out whenever you need to completely empty the residual water from

This procedure is carried out whenever you need to completely empty the residual water from

the boiler.

the boiler.

It is recommended to carry out the SteamOut when the machine is used in places

It is recommended to carry out the SteamOut when the machine is used in places

where the temperature could freeze the water inside the machine

where the temperature could freeze the water inside the machine

When the machine is switched on the procedure starts; the display changes

When the machine is switched on the procedure starts; the display changes

to yellow and the word “ON” indicates that the procedure is running.

to yellow and the word “ON” indicates that the procedure is running.

During the procedure the 2-way solenoid valve remains open and the

During the procedure the 2-way solenoid valve remains open and the

steam is discharged.

steam is discharged.

Caution!!!

Caution!!!

If the dreg drawer is not fully in, the machine will ask you to insert it, this

If the dreg drawer is not fully in, the machine will ask you to insert it, this

must be done otherwise the 2- and 3-way solenoid valves are not powered.

must be done otherwise the 2- and 3-way solenoid valves are not powered.

Caution!!!

Caution!!!

If the side hatch opens, the machine warns you to close it, the hatch must

If the side hatch opens, the machine warns you to close it, the hatch must

be closed otherwise the 2- and 3-way solenoid valves will not be powered.

be closed otherwise the 2- and 3-way solenoid valves will not be powered.

When the procedure is completed, the message “COMPLETE” appears on

When the procedure is completed, the message “COMPLETE” appears on

the display, the solenoid valves close automatically and the machine may

the display, the solenoid valves close automatically and the machine may

be switched off.

be switched off.

To enter Test Mode

Hold down the Espresso and

1.

Menu buttons

Switch on the main switch at

2.

the back of the machine

1

2

10

«
...
36
37
38
39
40
...
»

Summary of Contents for HD 8753






























































Reviews:

No comments

Related manuals for HD 8753

Bread Bakery SD-253

Brand: Panasonic Pages: 23

Brand: Labelmate Pages: 2

Brand: La Pavoni Pages: 42

KITCHEN PRO K6725

Brand: Regal Ware Pages: 62

Brand: Melitta Pages: 12

Brand: Oster Pages: 46

BAR-STAR Series

Brand: La Pavoni Pages: 5

GranAroma SM6582

Brand: Saeco Pages: 590

Brand: T-Fal Pages: 20

Brand: Marco Pages: 9

Brand: Hamilton Beach Pages: 12

Brand: Scarlett Pages: 14

Brand: Unold Pages: 108

Brand: Skope Pages: 132

Brand: Dolce Gusto Pages: 20

Brand: Scarlett Pages: 26

Brand: ARIETE Pages: 5

Brand: Salton Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands