ZoneScape 1-A module documentation
.
Proposal
Page
9 of 28
Configuring Specific Date schedules
Configuring a Single / Specific date schedule is when the user want to trigger / turn
on and off one or more of the lights / zones on a
specific date and time. First the user needs to select a
target light / lights for this schedule. Once the light is
selected the "Single" submenu tab needs to be
selected (default). Then the user needs to select a start
date / time for this schedule and end date time for this
schedule. Then in order to send and apply the schedule
to the ZoneScape board the user needs to tap on the
"OK" button. The application will try to establish a
connection with the target ZoneScape board and once
established the configured schedule will be sent and
applied to the target ZoneScape board. Once the user
taps on the "OK button" a new progress dialog pops up
informing the user that the settings are being sent to
the target ZoneScape board. On a successful
transmission the dialog should close after a 1 - 2
seconds.
After a successful transmission the newly created schedule will appear in the list of
schedules tab as follows:
The List of schedules include all the configured schedules for the target ZoneScape
unit.