ZoneScape 1-A module documentation
.
Proposal
Page
22 of 28
ZoneScape Screenshot , showing the default zones for Unit 1 , configured in the
System.
Changing a zone name / button name is a matter of tapping and holding the relevant
zone button for at least two seconds. After that a textbox appears and provides the
user to edit and save the Zone name / button name. The above option is available for
every single ZoneScape controller / unit configured in the ZoneScape application.
The image below shows a screenshot showing the edit text textbox that gives the
ability to change zone names.
After entering the Zone name / button name , the user taps on "Done" and the
entered value is updated in the user interface and in the app database.