background image

19

English

3139 116 18533

Selecting External Equipment

If you have connected the audio out
terminals of the external equipment (TV,
VCR, Laser Disc player, DVD player, or CD
Recorder) to the AUX/CDR IN terminals,
you can hear the enhanced sound from the
system.

• Press 

AUX

 to select AUX-CDR mode.

"

CDR

" will be displayed.

• Press 

AUX

 again to select the external

mode.

"

AUX

" will be displayed.

Notes:
– There are two AUX modes:

i. the normal AUX mode.
ii.  the CDR mode; where the LINE OUT

of this mini system is muted. You will
not be able to record or listen to the
sound from the LINE OUT.

– You are advised not to listen to and

record from the same source
simultaneously.

– All the sound control features (e.g. DSC,

DBB, etc.) are available for selection.

TAPE

AUX/CDR

KARAOKE

Microphone Mixing

1

Set the 

MIC LEVEL

 control to the

minimum level to prevent acoustic
feedback (e.g. a loud howling sound)
before you connect the microphone.

2

Connect a microphone to the 

MIC

socket.

3

Press 

CD

TUNER

TAPE

 or 

AUX

.

4

Play the selected source.

5

Adjust the volume level with 

VOLUME

control.

6

Adjust the 

MIC LEVEL

 control to the

mixing level that you want.

7

Start singing or talking through the
microphone.

Note:
– Keep the mic away from the speakers to

prevent howling.

REC

SHUFFLE

TIMER 

STEREO

FM

BACK

HSD

REPEAT

PROGRAM

LW

MW

AM

T.A.

NEWS

FRONT

60Hz

500Hz

250Hz

1KHz

2KHz

4KHz

8KHz

TAPE

CD

OG

SIDE

A•B

TUNER

AUX

PRESET

STOP•CLEAR

SEARCH • TUNING

PLAY PAUSE

PREV

NEXT

C D 1  •   2   •   3

CDR

BAND

TAPE  1 •  2

A. REV

MIC 

MIC

LEVEL

When you release 

à

 or 

á

, the

tape continues playing.

Notes:
– During rewinding or fast forwarding of a

tape, it is also possible to select another
source (e.g. CD, TUNER, or AUX).

– Before use, check and tighten slack tape

with a pencil.  Slack tape may get
jammed or may burst in the mechanism.

– C-120 tape is extremely thin and is

easily deformed or damaged.  It is not
recommended for use in this system.

– Store the tapes at room temperature

and do not put them too close to a
magnetic field (for example, a
transformer, TV, or speaker).

.

Untitled-13

6/15/00, 1:16 PM

19

Downloaded From Disc-Player.com Philips Manuals

Summary of Contents for FW545



























Reviews: