16
English
3139 116 18533
™
The system will search for every
available station in the FM waveband
first, then search by the MW and LW
wavebands.
™
All available radio stations will be
stored automatically. The frequency
and preset number will be displayed
briefly.
™
The system will stop searching when
all the available radio stations are
stored or when the memory for 40
preset radio stations is used.
™
The system will remain tuned to the
last stored preset radio station.
Notes:
– You can cancel the automatic
programming by pressing PROGRAM or
STOP•CLEAR
Ç
(on the system only).
– If you want to reserve a section of
preset numbers, for example preset
numbers 1 to 9, select preset 10 before
starting automatic programming: only
the preset numbers 10 to 40 will be
programmed.
Manual programming
1
Press
TUNER
(BAND).
2
Press
TUNER
(BAND) again to select
the desired waveband : FM, MW or LW.
3
Press
PROGRAM
for less than one
second.
™
The
PROGRAM
flag starts flashing.
™
The next available preset number will
be displayed for selection.
TUNER
4
Press
TUNING
à
or
á
to tune to the
desired frequency.
• If you wish to store the radio station to
another preset number, press
PRESET
4
or
3
to select the desired preset
number.
5
Press
PROGRAM
again.
™
The
PROGRAM
flag disappears and the
radio station will be stored.
• Repeat the
steps 3 to 5
to store other
preset radio stations.
Notes:
– When 40 radio stations are stored and
you attempt to store another radio
station, the display will show"
FULL
”.
If you want to change an existing preset
number, repeat steps 3 – 5.
– You can cancel manual programming by
pressing STOP•CLEAR
Ç
(on the
system only).
– During programming, if no button is
pressed within 20 seconds, the system
will exit program mode automatically.
Tuning to Preset Radio
Stations
• Press
PRESET
4
or
3
to select the
desired preset number.
™
The preset number, radio frequency,
and waveband appear on the display.
Receiving RDS Radio Station
Ç
RDS (Radio Data System) is a broadcasting
service that allows FM stations to send
additional information along with the
regular FM radio signal. This additional
information can contain:
•
STATION NAME:
The radio station
name is displayed.
•
FREQUENCY:
The frequency of the
radio station is displayed.
•
PROGRAM TYPE:
The following
program types exist and can be received
by your tuner: News, Affairs, Info, Sport,
Educate, Drama, Culture, Science,
Varied, Pop M, Rock M, M.O.R. (middle
of the road music), Light M, Classics,
Other M, No type.
•
RADIO TEXT (RT):
text messages
appear in the display.
When you have tuned to a RDS station, the
RDS logo (
Ç
) and the radio station name
will appear on the display:
• The display normally shows the radio
station name if available.
By repeatedly pressing
RDS
button you
can change the type of display
information:
™
The display shows in turn:
STATION NAME
™
PROGRAM TYPE
™
RADIO
TEXT
™
FREQUENCY
™
STATION NAME
...
Note:
– When you press the RDS button and the
display shows "
NO RDS
", it indicates
that either the tuned station is not
transmitting RDS signal or it is a non
RDS station.
RDS Clock
Some RDS station may be transmitting a
real clock time at an interval of every
minute.
Setting the time with RDS clock
1
Press
CLOCK/TIMER
.
™
"
--:--
" or current time appears on
the display.
2
Press
CLOCK/TIMER
once more to
enter clock setting mode.
™
"
00:00
" or current time starts
flashing.
3
Press
RDS
.
™
The message "
SEARCH RDS
TIME
" will be displayed.
™
If the station does not transmit RDS
clock, "
NO RDS TIME
" will be
displayed.
™
When the RDS clock is read, "
RDS
TIME
" will be displayed. The
current clock time is displayed for 2
seconds and will be stored
automatically.
™
If within 90 seconds, the RDS time is
not detected, "
NO RDS TIME
"
will be displayed.
Untitled-13
6/15/00, 1:15 PM
16
Downloaded From Disc-Player.com Philips Manuals
