21
English
3139 116 18533
RECORDING
Notes:
– Only
å
å
å
å
å
or
∂
∂
∂
∂
∂
mode is available
during recording.
– During recording, it is not possible to
listen to another source.
Dubbing tapes
(from tape deck 1 to
tape deck 2)
1
Press
TAPE
( TAPE 1•2 ) to select tape
deck 2.
2
Load the prerecorded tape into tape
deck 1 and a blank tape into tape deck
2.
™
Make sure the tape in tape deck 1
has its full spool to the left.
3
(For Tape Deck 2 only)
Press
SIDE
on the remote control to
select the recording side.
4
Press
DUB (HSD)
once
for normal
speed dubbing or
twice
(within 2
seconds) for high speed dubbing.
™
“
NORMAL
” (normal speed) or
“
FAST
” (high speed) will be
displayed, followed by
“
DUBBING
”.
™
The
HSD
flag appears on the display
during high speed dubbing.
• Dubbing will start immediately.
™
The
REC
flag starts flashing.
5
Press
Ç
to stop dubbing.
Notes:
– At the end of side A, flip the tapes to
side B and repeat the procedure.
– Dubbing of tapes is only possible from
tape deck 1 to tape deck 2.
– To ensure good dubbing, use tapes of
the same length.
– During high speed dubbing in Tape
mode, the sound is reduced to a low
volume.
– You can listen to another source while
dubbing.
Recording the mixed sound /
One Touch Recording
• During microphone mixing, you can
record the mixed sound on a tape in
tape deck 2 except dubbing mode.
• For One Touch Recording, as soon as you
press
REC
, the current source (CD,
TUNER or AUX) will be recorded on tape
deck 2
1
Load a blank tape in tape deck 2.
2
Press
REC
to start recording.
™
The
REC
flag starts flashing.
3
Press
Ç
to stop recording.
Note:
– When you press RECORD while in TAPE
mode, "
SELECT SOURCE
" will be
displayed. One Touch Recording is not
possible in TAPE mode.
Digital Recording via Digital
Out
For CD digital recording, please refer to the
Instructions Manual of the CD Recorder,
digital audio equipment, etc.
Untitled-13
6/15/00, 1:16 PM
21
Downloaded From Disc-Player.com Philips Manuals