Départ. Technical support- CM640
PROCEDURE
COMPANY RESTRICTED
PHILIPS Consumer
Communications
Centre du Mans
Service Repair Support
VY-V-640-620-3
Page : 40
of
63
Language : EN
Date : 11/02/03
PHILIPS ELECTRONICS N.V. 1999
VY-V-640-620-3
All rights reserved. Reproduction in whole
or in part is prohibited without the written
consent of the copyright owner.
Login parameter:
This parameter is provided by the operator and is set as follows:
Password parameter:
This parameter is provided by the operator and is set as follows:
Gateway parameter (IP):
An IP address is used to recognize computers connected to a network. It is made up of 4 * 3 digits (8 bits) and separated by
points. Each computer has its own IP address. For W@P application, IP address is used to access the gateway. This parameter
is provided by the operator and is set as follows:
Press OK to
set the login
Enter the login and
press OK
Press OK to
set the
password
Enter the password
(when a password has been
recorded once, only some keys-
appears when going back again in
this menu)
Select IP Address
and press OK
Press the OK to set the
gateway (IP parameter)
Enter the IP parameter
and press OK
