Philips eW Burst Powercore Manual Download

Page: 21 / 28

eW Burst Powercore Product Guide

• Disengage the leader cable from the fixture’s canopy base.

2. Mount junction boxes in accordance with the lighting design plan.
3. Position each eW Burst Powercore Architectural fixture in its designated

mounting location. Make sure the mounting surface is flat, suitable for the

mounting hardware, and clear of debris and other obstructions.

4. Use four suitable mounting screws to secure each eW Burst Powercore

Architectural fixture to the mounting location.

5. If installing fixtures in a series, pull 3-conductor copper wire between the junction

boxes. If installing fixtures in parallel, pull 3-conductor copper wire from line

power to a common junction box, and from the common junction box to each

fixture’s junction box.

We recommend the use of 12 AWG (2.05 mm), stranded 3-conductor copper

wire.

6. Use wire nuts to connect line, neutral, and ground, and tuck wire connections

into the junction box.

7. Secure all junction box covers. If installing in a damp or wet location, seal all

junction boxes with contractor-grade RTV silicone sealant. Use gaskets, clamps,

and other parts and fittings required to comply with local outdoor wiring codes.

8. If installing in parallel, connect the wires from each fixture to the lead wire from

the line power source in the common junction box.

9. Connect the wire from the first fixture in the series to the line power source if

installing in series, or from the common junction box to the line power source if

installing in parallel.

RTV Silicone

UL / cUL

CE / PSE

UL / cUL

CE / PSE

L N

UL / cUL

CE / PSE

L N

UL / cUL

CE / PSE

UL / cUL

CE / PSE

L N

UL / cUL

CE / PSE

L N

Fixture cable dimensions

.38 in

(9.6 mm)

18 AWG

.04 in (1 mm)

Ensure that all junction boxes are

suitable for the environment and that all

wiring between junction boxes complies with

local codes.

Summary of Contents for eW Burst Powercore





























Search results

Summary of Contents for eW Burst Powercore

Reviews:

Related manuals for eW Burst Powercore

Brands by name

Popular brands

Philips eW Burst Powercore, Manual

Search results

Summary of Contents for eW Burst Powercore

Reviews:

Related manuals for eW Burst Powercore

Brands by name

Popular brands