Philips eW Burst Powercore Page 19 Manual Download

Page: 19 / 28

eW Burst Powercore Product Guide

Connect and Mount eW Burst Powercore

Fixtures

eW Burst Powercore fixtures can be installed in series or in parallel (wired to a

common junction box).
• eW Burst Powercore Architectural fixtures feature a canopy base for mounting

to standard US junction boxes. Fixtures can be mounted directly to a surface

or substrate by removing the nylon cable clamp and disengaging the 6 ft (1.8 m)

integrated power cable from the canopy base.

• eW Burst Powercore Landscape fixtures feature a 1.2 in NPT threaded post for

mounting to standard junction boxes and third-party mounting accessories such as

stanchion mounts, posts, and stakes.

eW Burst Powercore fixtures can be controlled either with a standard wall switch

(on / off) or a commercially available electronic low-voltage (ELV) dimmer. eW Burst

Powercore fixtures work with many trailing edge or reverse phase control ELV

dimmers. Refer to the installation instructions included with the wall or dimmer

switch for installing and wiring information.
Make sure the power is OFF before mounting and connecting eW Burst Powercore

fixtures.

Connecting eW Burst Powercore Architectural Fixtures to Junction Boxes

1. Mount junction boxes in accordance with the lighting design plan. Each fixture

is designed for mounting in a 4 in (102 mm) round US electrical junction box,

rated for your application, with 3.5 in (89 mm) center-to-center screw holes for

attaching the fixture’s base.

2. If installing fixtures in a series, pull 3-conductor copper wire between the junction

boxes. If installing fixtures in parallel, pull 3-conductor copper wire from line

power to a common junction box, and from the common junction box to each

fixture’s junction box.

We recommend the use of 12 AWG (2.05 mm), stranded 3-conductor copper

wire.

3. Trim the cable from the fixture to fit in the junction box, leaving enough cable to

make wiring connections.

4. If installing in a damp or wet location, Insert the fixture cable through the

provided junction box gasket before making wire connections. When attaching the

fixture to the junction box, ensure that the gasket is compressed evenly.

Ensure that all junction boxes are

suitable for the environment and that all

wiring between junction boxes complies with

local codes.

UL / cUL

CE / PSE

UL / cUL

CE / PSE

L N

UL / cUL

CE / PSE

L N

UL / cUL

CE / PSE

UL / cUL

CE / PSE

L N

UL / cUL

CE / PSE

L N

Fixture cable dimensions

.38 in

(9.6 mm)

18 AWG

.04 in (1 mm)

Summary of Contents for eW Burst Powercore





























Search results

Summary of Contents for eW Burst Powercore

Reviews:

Related manuals for eW Burst Powercore

Brands by name

Popular brands

Philips eW Burst Powercore, Manual

Search results

Summary of Contents for eW Burst Powercore

Reviews:

Related manuals for eW Burst Powercore

Brands by name

Popular brands