Philips eW Burst Powercore, Manual

Page: 14 / 28

eW Burst Powercore Product Guide
14
4.5 in
(114 mm)
5.625 in
(143 mm)
9.85 in
(250 mm)
7 in
(178 mm)
5/16 in hex
(8 mm hex)
4.5 in
(114 mm)
8.06 in
(205 mm)
7 in
(178 mm)
eW Burst Compact Powercore Specifications
Due to continuous improvements and innovations, specifications may change without notice.
Item Specification Details
Output
Beam Angle
8° primary optic
14° / 23° / 41° spread lenses
10° x 41° asymmetric spread lens
CRI 83 (2700 K) 81 (4000 K)
Lumen Maintenance ‡
90,000 hours L70 @ 25° C 50,000 hours L70 @ 50° C
120,000 hours L50 @ 25° C 90,000 hours L50 @ 50° C
Electrical
Input Voltage 100 – 277 VAC, auto-switching, 50 / 60 Hz
Power Consumption 15 W maximum at full output, steady state
Power Factor .995 @ 120 VAC (2700 K) .994 @ 120 VAC (4000 K)
Control Dimming
Compatible with many commercially available ELV, trailing edge,
or reverse-phase control dimmers §
Physical
Dimensions
(Height x Width x Depth)
9.85 x 4.5 x 7.0 in (250 x 114 x 178 mm) Architectural
8.06 x 4.5 x 7.0 in (205 x 114 x 178 mm) Landscape
Weight 8.7 lb (3.9 kg) Architectural 4.4 lb (2.0 kg) Landscape
Housing Die-cast aluminium, powder-coated finish
Lens Tempered glass
Fixture Connections
6 ft (1.8 m) unified power / data cable with flying leads Architectural
6 in (152 mm) flying leads Landscape
Temperature Ranges
-40° – 122° F (-40° – 50° C) Operating
-4° – 122° F (-20° – 50° C) Startup
-40° – 176° F (-40° – 80° C) Storage
Vibration Resistance ANSI C136.31 (Architectural only)
Humidity 0 – 95%, non-condensing
Certification
and Safety
Certification UL / cUL, FCC Class A, CE
Environment Dry / Damp / Wet Location, IP66
Item Color Temp.* 8° primary 14° 23° 41° 10° x 41°
Lumens †
2700 K 624 543 540 520 557
4000 K 812 685 674 646 695
Efficacy (lm / W)
2700 K 41.9 36.4 36.2 34.8 37.4
4000 K 53.8 45.7 44.6 42.8 46.3
eW Burst Compact
Powercore Landscape
eW Burst Compact
Powercore Architectural
* Color temperatures conform to nominal CCTs as defined in ANSI Chromaticity
Standard C78.377A.
† Lumen measurement complies with IES LM-79-08 testing procedures
‡ L70 = 70% maintenance of lumen output (when light output drops below 70% of initial output).
L50 = 50% maintenance of lumen output (when light output drops below 50% of initial output).
Ambient temperatures specified. Based on measurements that comply with IES LM-80-08 testing
procedures. Refer to www.colorkinetics.com/support/appnotes/lm-80-08.pdf for more information.
§ Refer to www.colorkinetics.com/support/appnotes/ for specific details