EN 11
3139 785 30981
5.
Upgrade Software & Repair Chart
5. Upgrade Software & Repair Chart
5.1
A. Preparation to upgrade
fi
rmware:
1. Unzip the zip-archive
fi
le
2. Start the CD Burning software and create a new CD project (data disc) with the following settings:
File
system: Joliet
Format:
MODE 2: CDROM XA
Recording mode:
SINGLE SESSION (TRACK-AT-ONCE), FINALIZED CD
Note: Long
fi
le name is necessary for the preparation of the upgrade disc
3. Place the content of the zip-archive into the root directory of the new CD project.
4. Burn the data onto a blank CDR or CD-RW
B. Procedure to apply the
fi
rmware upgrade:
1. Power up the set and open tray.
2. Insert the prepared Upgrade CDROM and close the tray,
3. The TV connected to the set will display:
Software Upgrade Disc detected
Select OK to start or CANCEL to exit
4. Press OK button to con
fi
rm upgrading (use left/right button for selection)
5. The TV connected to the set will display:
Upgrading Software, Please wait
Do not switch off the power
6. When the upgrading process is successful the tray will open and the TV connected to the set will display:
System is successfully upgraded.
Remove disc from tray & reset system
7. Remove the Upgrade Disc and press OK button to con
fi
rm
8. The TV screen goes blank, tray close and after a while the Philips Logo screen appear again.
C. How to read out the
fi
rmware version to con
fi
rm upgrading
1. Power up the set and with no disc in the tray
2. Press <0009> and <OK> buttons on the remote control