background image

Meaning of symbols

Important information:
Must be read and understood.

The "Material recyclability symbol" means the package cardboard or User manual
paper is recyclable.

The "Material recyclability symbol" affixed on plastic parts means these parts are
recyclable.

The "Green Dot" affixed on cardboard means PHILIPS pays a financial duty to the
"Avoidance and Recovery of Packaging Waste" organization.
This receiver contains a large number of materials that can be recycled. If you are
disposing of an old receiver, please take it to a recycling centre.

Safety and environmental instructions

Your receiver has been manufactured to meet the appropriate safety standards, but the
instructions below should be followed to operate it safely.
These instructions must be kept for future reference.

- Before connecting the receiver to the mains, check that the mains supply voltage corresponds

to the voltage printed on the rear of the receiver. If the mains voltage is different, consult the
dealer.

- The receiver does not contain any user-serviceable parts. All maintenance work must be

carried out by qualified personnel.

- If you disconnect the receiver from the mains, make sure to unplug it from the wall socket and

not just from the AC socket at the back of the unit. Children could seriously injure themselves,
as the free end of the cable is still alive.

- Unplug the receiver during lightning storms.
- To prevent fire or shock hazard, do not expose this equipment to rain or moisture.
- The receiver should be placed on a firm surface, and the ventilation openings must not be

covered with items such as newspapers, table clothes, curtains, etc.

- Do not install the receiver near any heat sources such as radiators, stoves or any other

apparatus that produces heat. Protect it from direct sunlight.

- When installing the receiver, ensure there is a gap of approximately 2.5 cm around the receiver

to enable air to circulate freely and prevent overheating.

- Leave accessible the mains connector at the back of the unit in case emergency shutdown is

required.

- Do not place any combustible objects on the receiver (candles, etc.).
- No objects filled with liquids, such as vases, should be placed on the unit. The receiver should

not be exposed to dripping or splashing. Should this happen, disconnect your receiver from the
mains and consult your dealer.

- Make sure that children do not place any foreign objects in any of the openings.
- For cleaning, use a soft, damp (not wet) cloth. Never use any abrasive cloth or aerosol cleaners.

English

S A F E T Y I N S T R U C T I O N S

1

4610_A5_GB.qxp  24/04/2007  14:36  Page 1

Summary of Contents for DTR2610/24

























Reviews: