English
6.7.3
Signal meter
Signal Meter
is used to display the strength and quality
of the signal broadcast at the specified frequency in order
to check your antenna connection and setup.
Signal Meter
6.7.4
Channel Search
Channel Search
is used to either
Search
for
New
Channels
or
Reinstall All Channels
(your channel list
will be replaced by a new one).
Press
OK
to launch the channel search. You may
interrupt this procedure by pressing
BACK
.
Channel Searching
6.7.5
Decoder Status
Decoder Status
provides information about the system,
loader, and smart card.
Besides, the
Decoder Upgrade
item is used to check
whether new software is available for your receiver. If
available, press
OK
to initiate the upgrade. Do not
interrupt this operation once started.
Decoder Status Submenu
6.7.6
Factory Reset
Set
Restore Settings
to
Yes
, and then press
OK
to
restore the factory settings of the receiver and restart the
first-time installation process. As a result, your channel list
will be replaced by a new one.
6.8 Help
Factory Reset
This submenu is used to provide information on how to
use your receiver and set the various settings.
18
M A I N M E N U
4610_A5_GB.qxp 24/04/2007 14:36 Page 18
