21
Use more of your Digital Terrestrial Receiver
ENGLISH
Press the
OK
key to start the automatic
scan mode.
Using or , choose whether:
The channels found are to be added to the
•
old list (standard setting),
The old channel list is to be overwritten,
•
The new found channels are to be
•
discarded.
Press the
OK
key.
Manual Search
This type of scan mode enables the speci
fi
c
search for an individual channel. This is
particularly interesting if you only want to
include one individual channel into your channel
list and you know the accurate information on
the channel and frequency.
Highlight
Manual Search
and then press
OK
.
Extended installation
5.5
Press the
MENU
key.
Highlight the second menu item
Search for
Channels
using the
arrow key or and
then press
OK
.
After the
fi
rst installation (refer to chapter
Install
), it may be required to search for
channels again or to add speci
fi
c channels that
are additionally broadcast.
Note
In order to carry out an extended installation,
you have to reset the device to its default
settings. Refer to chapter
Restoring Factory
Settings
.
Two options are available.
Automatic Search
This scan mode is usually the appropriate
one, because normally all channels are found
automatically.
Highlight
Automatic Search
and then
press
OK
.