12
QUICK START UP
6 Quick start up / First installation / Channel
scan
6.1
Quick start
- You already have an aerial.
- Your aerial is correctly pointed at the terrestrial
transmitter corresponding to your area (1).
- Your digital receiver connection is according to the
diagram depicted in chapter 5.1 or 5.2.
- Your digital receiver is ON and the WELCOME screen
(shown here) pops up.
- The selection is on Install. Press the
*
button to
start scanning for channels.
The receiver scans the UHF band and reports scanning
progress and found channels.
When scanning is completed:
- Either scanning ended successfully, found channels are
displayed and the digital receiver tunes the first channel
in the list. If so proceed to chapter 7.
- Or scanning failed and stopped while the Check signal
screen pops up. If so proceed with chapter 6.2.
6.2
Scanning has failed / check
installation / check signal from aerial
Scanning failed therefore before making a new scanning
check:
- Aerial cable.
- Check the aerial connection to your digital receiver.
Refer to the connection diagram of chapter 5.1 or 5.2
- Check channel(s) available in the region corresponding
to your area (1).
- Check signal quality, by means of the Check signal
menu beside.
Press the
9
button to select the RF channel option.
Press the
*
button and scroll with the
9
or
8
button
to select the wanted RF channel number, in the CH 21-
69 range, corresponding to your area.
Check signal strength and quality on bar meters.
English
