DPM 9450 - User Manual
34
•
To insert a character before the current position, press the INS/OVR (Insert/Overwrite) button. The DPM
displays an underscore character; this will be replaced by the character you either insert manually (Jog Dial)
or by voice (alphanumeric recognition).
To delete the current character,
press the DEL (Delete) button. To delete all characters of the current Keyword input, move the 4-Position
Switch to the Fast Rewind position (DPM 9450/00: ; DPM 9450/52: FRWD).
Keyword recognition
In Keyword recognition mode you can use phrases for providing the Keyword input. Phrases are voice commands
you have trained for the content definitions of a predefined Keyword. The DPM recognizes the phrase and
automatically assigns the correct definition to your current dictation. For more information on how to define
Keywords, refer to the
SpeechExec Dictate Online Help
.
DPM 9450 supports Keyword commands for up to two Keywords. If two Keywords are enabled for Keyword
commands in
SpeechExec Dictate
, the Keyword input becomes mandatory. This means that when you create a
new dictation, you are immediately prompted to provide the Keyword input via Keyword commands. If only one
Keyword has been enabled, you can provide the Keyword input at any time during dictation. Do the following:
1. Make sure your dictation is in Stop mode; on DPM 9450/00 this can also be Record Standby mode. This first
step is valid in the case of one Keyword enabled for voice commands only.
2. Press the DL/
VC
button to enter recognition mode. Keep the button pressed while you use voice commands.
The DPM displays the Keyword usage (in this example:
work type
) and you can say the command phrase. For
example, say:
letter
.
3. The recognition result, in this example the Keyword definition
letter
, appears on the screen.
4. Confirm the Keyword input by pressing the Jog Dial.
Additional information
•
The LED provides feedback about the recognition result. If the LED is green, recognition has been successful.
The LED is red if nothing has been said or if recognition did not succeed.
•
If two Keywords are enabled for voice commands, you are automatically prompted for the Keyword input when
you create a new dictation. When you confirm the input for the first mandatory Keyword by pressing the Jog
Dial, you are prompted automatically to provide the next input. You cannot start dictation until you have
provided the input for both Keywords.
•
If the recognition result which appears on the display is not correct for the phrase you used, repeat the phrase.
Do not confirm the input until the correct result is displayed.
•
To discard the recognition result and return to your dictation, press the DEL (Delete) button for about
0.5 seconds.
•
In dictation mode, only the Keyword input for Keyword 1 is displayed on the DPM display.
Summary of Contents for DPM 9450
Page 1: ...DPM 9450 User Manual ...
