Rev :
Type :
Date :
Brand :
Page :
0.1
221V2
21.5” Wide FHD LCD Monitor
2009/11/10 PHILIPS 12 of 24
DC Power Off
N/A
< 0.5W
LED Off
3.7 VGA Display identification
In accordance with VESA Display Channel Standard Ver.1.0 and DDC 2B capability
3.8 DVI Display identification
In accordance with DVI requirement (DDWG digital Visual Interface revision 1.0)
Use DDC-2B, DDC/CI, and EDID V1.3 .
3.9 USB support
Connect the upstream port of the monitor to host PC’s USB port via USB cable,
Then attach external device to the downstream port of the monitor.
Check if the device can work properly.
3.10 DDC /CI Support and Smart Manage/Control
In accordance with VESA DDC/CI and MCCS ver.2.0, the monitor should be
workable with Philps SmartManage(N/A), SmartControl V1.21, and Protrait Display
Tune at least.
3.11 Hot-key definition
HOT KEY.xls
3.12 SmartContrast
Smart Contrast is a kind of backlight control.
This function changes the panel backlight according to the frame brightness
histogram.
At least the minimum contrast ratio has to be 300K
:1(Typical)
.
4. Visual characteristics
4.1 Test conditions
Unless otherwise specified, this specification is defined under the following
conditions.
(1) Input signal : As defined in 3.3, 1920 x 1080 non-interlaced mode
(1920X1080@60Hz 148.5MHz), signal sources must have 75 ohm output
impedance.
(2) Luminance setting : controls to be set to 250 nits with full screen 100 %
duty cycle white signal
(3) Warm up : more than 30 minutes after power on with signal supplied.
(4) Ambient light : 400 -- 600 lux.
Summary of Contents for C221V2SB/01
