Rev :
Type :
Date :
Brand :
Page :
0.1
191V2 18.5” LCD Monitor
2009/07/15 PHILIPS 13 of 26
Data for EDID & .inf file
1 User visible strings on .inf file
Philips 191V (19inch WIDE LCD MONITOR 191V2)
2 Manufacturer ID ( EDID data)
PHL
3 Product ID, "xxxx" 4 codes
MSB(byte 12): 08
LSB (byte 11): 87
4 maximum
resolution
1366x768
5 Horizontal Frequency Range
30~83 KHz
6 Vertical Frequency Range
56~76Hz
7 Monitor Name (13 characters max.)
Philips 191V
3.11
Hot-key definition
HOT KEY.xls
Any deviation between document and sample, please refer to Philips approved sample.
4
Visual characteristics
4.1
Test conditions
Unless otherwise specified, this specification is defined
under the following conditions.
(1) Input signal
: As defined in 3.3, 1366*768
non-interlaced mode (1366*768@60Hz 85.50MHz), signal
sources must have 75 ohm output impedance.
(2) Luminance setting : controls to be set to
250
nits with
full screen 100 % duty cycle white signal
(3) Warm up: more than 30 minutes after power on with signal supplied.
(4) Ambient light: 400 -- 600 lux.
(5) Ambient temperature: 20 ± 5
°
C
4.2
Brightness
To follow Panel specification.
4.3
Image size
Actual display size :
Refer to
2.1
LCD PANEL spec.
Summary of Contents for C221V2SB/01
