English
17
Radio Reception
Tuning to radio stations
1
Press
SOURCE
on the set (or
FM
on the
remote control ) repeatedly until TUNER is
displayed.
2
Press down on
TUNING
à
/
á
(or
à
/
á
on the remote control) and release the button.
➜
The radio automatically tunes to a station
with sufficient reception. Display indication during
automatic tuning: SEARCH.
3
Repeat step
2
if necessary until you find the
desired station.
●
To tune to a weak station, press
TUNING
à
/
á
(or
à
/
á
on the remote control) briefly
and repeatedly until you have found optimal
reception.
Programming radio stations
You can store up to a total of 40 radio stations
in the memory.
Automatic programming
Automatic programming will start with a chosen
preset number. From this preset number
upwards, former programmed radio stations will
be overridden. The system will only programme
stations which are not in the memory already.
1
Press
í
/
ë
(or
ALBUM//-
on
the remote control) to select the preset
number where programming should star t.
Note:
– If no preset number is selected, default is preset
(1) and all your presets will be overridden.
2
Press
PROG
on the remote control for more
than 2 seconds to activate programming.
➜
AUTO
is displayed and available stations are
programmed in order of waveband reception
strength. The first preset automatically stored will
then be played.
Manual programming
1
Tune to your desired station (see Tuning to radio
stations).
2
Press
PROG
on the remote control to activate
programming.
➜
1
flashes in the display.
3
Press
í
/
ë
(or
ALBUM//-
on
the remote control) to allocate a number from
1 to 40 to this station.
4
Press
PROG
on the remote control again to
confirm the setting.
5
Repeat the above four steps to store other
stations.
●
You can override a preset station by storing
another frequency in its place.
Tuning to preset radio stations
●
Press
í
/
ë
(or
ALBUM//-
on
the remote control) until the desired preset
station is displayed.
RDS
Radio Data System
is a service that allows
FM stations to show additional information. If
you are receiving a RDS station,
and the
station name are displayed.
When automatic programming is used, RDS
stations will be programmed first.
Scrolling through different RDS
information
●
Press
RDS
on the remote control briefly and
repeatedly to scroll through the following
information (if available):
– Station name
– Radio text messages
– Program type
– Frequency
PG 001-028_BTM177_12-Eng
2/29/08, 16:01
17
