background image

18

English

Using USB connectivity

BTM177 is fitted with a USB por t in the front
panel, offering a plug and play feature which
allows you to play, from your BTM177, digital
music and spoken contents stored on a USB
mass storage device.

Using a USB mass storage device, you can also
enjoy all the features offered by BTM177 which
are explained and instructed in the sections of
disc operation.

Compatible USB mass storage devices

With the BTM177, you can use
– USB flash memory (USB 2.0 or USB 1.1)
– USB flash player (USB 2.0 or USB 1.1)
• USB device which requires driver

installation under Windows XP is not
supported.

Note:
– In some USB flash players (or memory devices),
the stored contents are recorded using copyright
protection technology. Such protected contents will
be unplayable on any other devices (such as
MCM204 device).

Supported formats:

– USB or memory file format FAT12, FAT16,

FAT32 (sector size: 512 - 4096 bytes)

– MP3 bit rate (data rate): 32-320 kbps and

variable bit rate

– WMA v9 or earlier
– Directory nesting up to a maximum of 8

levels

– Number of albums: maximum 99
– Number of tracks: maximum 800
– ID3 tag v2.0 or later
– File name in Uicode UTF8 (maximum length:

128 bytes

The system will not play or support the
following:

• Empty albums: an empty album is an album

that does not contain MP3/WMA files, and
will not be shown in the display.

• Non-suppor ted file formats are skipped. This

means that e.g.: Word documents .doc or
MP3 files with extension. dlf are ignored and
will not be played.

• AAC, WAV, PCM. NTFS audio files
• DRM protected WMA files
• WMA files in Lossless format

USB Connection

Playing a USB mass storage device

1

Make sure that your BTM177 is being powered
on.

2

Plug a compatible USB mass storage device to
BTM177’s USB port marked 

 . If needed, use

a suitable USB cable to connect between the
device and BTM177’s USB port.

The device will automatically power on.

If the device is not powered on, turn on the
power manually, then re-connnect it.

3

Press 

SOURCE

 repeatedly (or 

USB 

on the

remote) to enter USB mode.

PLEASE INSERT USB

 appears if no audio

file is found in the USB device.

4

Press 

2;

 on your BTM177 to start play.

To use other playback features, see the section of
CD/MP3 Operation.

Helpful hints:
– Make sure that file names of MP3 files end
with .mp3. and the file names of WMA files end
with .wma.
– For DRM protected WMA files, use Windows
Media Player 10 (or later) for conversion. Visit
www.microsoft.com for details about Windows
Media Player and WM DRM (Windows Media
Digital Rights Management).
– For USB device playing, if the display shows "OL",
it means that the USB device is electrically
overloading BTM177. You need to change a USB
device.
INFORMATION REGARDING USB DIRECT:

1. Compatibility of the USB connection on this

micro system:
a) This micro system supports most USB Mass
storage devices (MSD) that these devices are
compliant to the USB MSD standards.

i)  Most common Mass storage class

devices are flash drives, memory sticks, jump
drives and etc.

ii) If you see a "Disc Drive"  showing up on

your computer after you have plugged the mass
storage device into your computer, most likely it
is MSD compliant and it will work with this
micro system.

   b) If your Mass storage device requires a

battery/power source, please make sure you
have a fresh battery in it or charge the USB
device first and then plug it into the micro
system again.

PG 001-028_BTM177_12-Eng

2/29/08, 16:01

18

Summary of Contents for BTM177






























Reviews: