7.14.2 Packaging Robustness Test Specifications
Note: To conduct this during
Design Verification Test (DVT)
phase only.
Purpose is to reveal weak points in the Product or Packaging and to take preventive actions to strengthen
these points so as to ensure a more robust Product/Packaging.
The test is referenced to
ISTA-2A
standard as follows:
Drop Sequence:
(a) Drop on 1x Corner, 3x Edges, 6x Faces
(b) Select the vulnerable corners (e.g. thin packaging or weak product corner)
(c) The 3x edges are those radiating from the chosen Corner, and to drop from shortest to longest edge
(d) The Faces drops should be done from the smallest to the largest face
7.14.3 Stacking
Test
Condition: Reference IEC60068-2-3 Ca, Damp Heat Steady State at 40
°
C, 93%RH (
±
2%)
Duration: 1 day
Product is packed in packaging as per production
2-14
