Philips BDL4651VH/00, Service Manual

Page: 67 / 129

BDL4651VH LCD 67
General Product Specification
The following DDC/CI commands should be supported via command line:
No. Commands
1 Set Brightness
2 Set Contrast
3 Set Red Gain
4 Set Green Gain
5 Set Blue Gain
6 Get Brightness
7 Get Contrast
8 Get Red Gain
9 Get Green Gain
10 Get Blue Gain
2.4 Service mode
Detailed technical specification refers to Service delta technical specs.
•
Software Update:
¾ Through RS-232
2.5 Power Supply
2.5.1 Power supply features
•
AC line voltage range - 90Vac ~ 264Vac.
•
AC line frequency range - 50-60 Hz
±
3 Hz.
•
DC tact switch - Minimal power consumption when switch off
•
AC mains switch - No power consumption when switch off.
•
Inrush current - < 40A at 240Vac when cold start.
•
Leakage current - < 0.5mA at 240Vac.
•
Power factor correction - According to EN61000-3-2
2.5.2 Power consumption
•
Normal on - (TBD) w (typical), (TBD) w(max.)
•
Standby - < 0.5w, RC standby mode
•
Switch off (DC or TACT) - < 0.3w, RC in-active
•
Switch off (AC mains) - < No power consumption.
2.5.3 Display DPM standby (D-sub & HDMI input)
z DPM - The Display enters DPM off (sleep) mode when no H&V sync, one of H-
sync /
V-sync input or digital clock is absent. “No Video Input” message appears
before entering DPM mode. A delay of 15 seconds before entering the
power saving state is required to avoid misunderstanding of display
resolution and timing mode changes.