Philips BDL4651VH/00 Service Manual Download Page 6

Page: 6 / 129

BDL4651VH LCD

Installation

CONNECTING EXTERNAL EQUIPMENT (DVD/VCR/VCD)

USING COMPONENT VIDEO INPUT

1. Connect the green-colored (labeled as "Y") jack of the device to the

green-colored "Y" jack of the display.

2. Connect the blue-colored (labeled as "Pb") jack of the device to the

blue-colored "Pb" jack of the display.

3. Connect the red-colored (labeled as "Pr") jack of the device to the

red-colored "Pr" jack of the display.

4. Connect the red (R) and white (L) audio jacks of the device to the

AUDIO IN (AUDIO2 or AUDIO3) jacks of the display.

USING S-VIDEO INPUT

1. Connect the S-Video connector of the external device to the S-VIDEO

input of the display.

2. Connect the red (R) and white (L) audio jacks of the device to the

AUDIO IN (AUDIO2 or AUDIO3) jacks of the display.

USING VIDEO INPUT

1. Connect the Video connector of the external device to the VIDEO IN

input of the monitor. Use the supplied BNC-to- RCA adapter if

necessary.

2. Connect the red (R) and white (L) audio jacks of the device to the

AUDIO IN (AUDIO2 or AUDIO3) jacks of the monitor.

USING HDMI INPUT

Connect the HDMI connector of the external device to the HDMI input of

the monitor.

CONNECTING A PC

USING VGA INPUT

1. Connect the 15-pin VGA connector of the PC to the VGA IN connector

of the monitor.

2. Connect the audio cable to the AUDIO IN (AUDIO1) input of the

monitor.

USING DVI INPUT

1. Connect the DVI-D connector of the PC to the DVI-D connector of the

monitor.

2. Connect the audio cable to the AUDIO IN (AUDIO1) input of the

monitor.

Summary of Contents for BDL4651VH/00


































































































































Search results

Summary of Contents for BDL4651VH/00

Reviews:

Related manuals for BDL4651VH/00

Brands by name

Popular brands

Philips BDL4651VH/00, Service Manual

Search results

Summary of Contents for BDL4651VH/00

Reviews:

Related manuals for BDL4651VH/00

Brands by name

Popular brands