Philips Avent DECT baby monitor SCD520, Manual

Page: 12 / 26

1 Remove the lid of the compartment for the rechargeable battery
pack.
Insert the rechargeable battery pack.
Note: Make sure the + and - poles of the battery pack point in the right
direction.
Reattach the lid.
Put the small appliance plug in the parent unit and put the adapter in
a wall socket.
5 Leave the parent unit plugged in until the battery pack is fully
charged.
During charging, the battery light lights up red continuously.
When the battery pack is fully charged, the battery light lights up
green continuously.
When you charge the parent unit for the first time or after a long
period of disuse, switch it off and let it charge continuously for at least
10 hours.
Charging normally takes 8 hours, but it takes longer when the parent
unit is switched on while charging. To keep the charging time as short
as possible, switch off the parent unit during charging.
When the battery pack is fully charged, the parent unit can be used
cordlessly for at least 24 hours.
Note: When the parent unit is charged for the first time, the operating time
is less than 24 hours. The battery pack only reaches its full capacity after you
have charged and discharged it four times.
Note: When the parent unit is not connected to a power outlet or even when
the parent unit is switched off, the battery pack gradually discharges.
,
,
-
-
-
EngliSh
1