background image

Safety and general 
maintenance

If you do not intend to use the CD clock
radio for a long time, withdraw the power
cord from the wall outlet.

Place the set on a hard and flat surface so
that the system does not tilt.

Install the unit near the AC outlet and where
the AC power plug can be easily reached.

The apparatus shall not be exposed to drip-
ping or splashing.

Do not expose the set, batteries, CDs to
humidity, rain, sand or excessive heat caused
by heating equipment or direct sunlight.

No objects filled with liquids, such as vases,
shall be placed on the appartus.

No naked flame sources, such as lighted 
candles, should be placed on the apparatus.

Do not cover the set. Adequate ventilation
with a minimum gap of 6 inches between the
ventilation holes and surrounding surfaces is
necessary to prevent heat build-up.

The mechanical parts of the set contain 
self-lubricating bearings and must not be oiled
or lubricated.

To clean the set, use a soft dry cloth. Do not
use any cleaning agents containing alcohol,
ammonia, benzene or abrasives as these may
harm the housing.

CD player and CD handling 

The lens of the CD player should never be
touched!

Sudden changes in the surrounding tempera-
ture can cause condensation to form and the
lens of your CD player to cloud over. Playing
a CD is then not possible. Do not attempt to
clean the lens but leave the set in a warm
environment until the moisture evaporates.

Always shut the CD door to keep the CD 
compartment dust-free.To clean, dust the 
compartment with a soft dry cloth.

To clean the CD, wipe in a straight line from
the center towards the edge using a soft,
lint-free cloth. Do not use cleaning agents as
they may damage the disc.

Never write on a CD or attach any stickers
to it.

P01

P02

Safety and maintenance (See 

7

)

AVIS

AVISO

Summary of Contents for AJ130
















Reviews: