Clock
Digital tuner
P01
P02
•
Replace the battery once a year, or as often
as necessary.
Batteries contain chemical substances, so
they should be disposed of properly.
Basic operation
Switching on the system and selecting
function
1
Press
POWER
.
➜
The system will switch to the last selected
source.
2
To select desired source, press
SOURCE
once
or more.
Switching the system to standby
1
Press
POWER
.
Standby power consumption
(clock mode) . . . . . . . . . . . . . . . . . . . .. . . .
2.3W
Illumination brightness
1
Press
BRIGHTNESS
once or more.
➜
The brightness of the display can be adjusted:
High
➟
Low
➟
High
Setting the clock
The clock uses 24-hour time format.
1
In standby mode, press
PROGRAM/SET TIME
➜
The time digits flash.
2
Hold down or press
HOUR/MIN
repeated-
ly to adjust the hours and minutes.
3
Press
PROGRAM/SET TIME
to confirm
the setting.
Digital tuner
Tuning to radio station
1
Press
POWER
to switch on from standby.
➜
The system will switch to the last selected
source.
2
If TUNER is not selected, press
SOURCE
once or more to select it.
➜
The radio station frequency, waveband will
be displayed briefly, then clock is displayed.
is also displayed. (See
2
)
3
Press and hold
TUNING
∞
or
§
until the
frequency in the display starts running.
➜
The radio automatically tunes to a station
of sufficient reception.
4
Repeat step 3 if necessary until you find the
desired station.
•
To tune to a weak station, press
TUNING
∞
or
§
briefly and repeatedly until you have
found optimal reception.
5
To view radio information, press
DISPLAY
.
➜
The current waveband and frequency will
be displayed for several seconds (See
2
),
then it will switch back to clock display.
To improve reception:
FM: Extend and adjust the pigtail for optimum
reception.
Programming radio stations
You can store up to a total of 10 radio sta-
tions in the memory (10 FM), manually or
automatically (Auto store).
Manual programming
1
Tune to your desired station (see
Tuning to
radio stations
).
2
Press and hold
PROGRAM/SET TIME
to
activate programming
.
➜
Display:
PROG
flashes.
3
Press
PRE
3
,
4
once or more to allocate a
number from 1 to 10.
4
Press
PROGRAM/SET TIME
to confirm.
5
Repeat steps 1-4 to store other stations.
Helpful hints:
–
You can erase a preset station by storing
another frequency in its place.
This set complies with the radio
interference requirements of the
European Community.
AVIS
AVISO
Summary of Contents for AJ130
Page 6: ...1 8 2 9 5 4 3 0 7 6 1 ...
Page 7: ...X PROG SLEEP 2 3 4 5 6 7 ...
