Philips 61430036, User Manual

Page: 45 / 58

OccuSwitch DALI
User Guide
Page 45
2A Store the value in the DTR as the maximum
level x
2B Store the value in the DTR as the minimum
level x
2C Store the value in the DTR as the system
failure level x
2D Store the value in the DTR as the power on
level x Is accepted, has no effect
2E Store the value in the DTR as the fade time x
2F Store the value in the DTR as the fade rate x
40+ Scene Store the value in the DTR as the
selected scene x
50+ Scene Remove the selected scene from the
slave unit x Except for scene 0
60+ Group Add the slave unit to the selected
group x
70+ Group Remove the slave unit from the
selected group x
80 Store the value in the DTR as a short address x
90 Returns the status of the slave as
XX XX
x
91 Check if the slave is working YES/NO x
92 Check if there is a lamp failure YES/NO x
93 Check if the lamp is operating YES/NO x
94 Check if the slave has received a level out of
limit
YES/NO
x
OSD LRM2090 DALI commands Executed for all OSD slave luminaires the same
Executed
Hex # Command Other