38
4
When complete, press the
Navigation
buttons
to select
[Done]
.
5
Press
OK
.
The
»
[Installation]
menu appears.
Note
If you have further problems with the
•
reception of your digital broadcast, contact a
specialised installer.
Change startup message
settings
Enable or disable messages that appear at
the startup to indicate whether a channel or
installation update is needed.
1
In the
[Installation]
menu, press the
Navigation buttons
to select
[Channel
installation]
>
[Channel update
message]
.
2
Press
OK
.
3
Press the
Navigation buttons
to select
[On]
or
[Off]
.
Startup messages are enabled or
»
disabled.
5
Press
OK
.
Follow the on-screen instructions
»
to complete channel update. When
the update is complete,
[Done]
is
selected and a list of added channels is
displayed.
6
Press
OK
.
The
»
[Installation]
menu appears.
Test digital reception
You can check the quality and signal strength
of digital channels. This allows you to reposition
and test your antenna or satellite dish.
1
In the
[Installation]
menu, press the
Navigation buttons
to select
[Channel
installation]
>
[Digital: Reception test]
>
[Search]
.
2
Press
OK
.
The
»
[Search]
menu appears.
3
Press:
The
•
Navigation buttons
or
Numeric
buttons
to manually enter the
channel frequency.
The
•
Navigation buttons
to select
[Search]
, then press
OK
to
automatically search for the next
channel.
If the signal quality and strength
is poor, reposition the antenna or
satellite dish and retest.
Select Update channels
to update your current
channel list. Select Re-
install channels to search
and store all channels
again.
Re-install channels
Update channels
EN
