Philips 3000 series, Service Manual, Page: 58 / 79

PHILIPS 4000 and 3000 05 SERVICE MODE
17/18
5.2.1. SteamOut
To enter in SteamOut
The machine enters SteamOut mode by holding pressed together the COFFEE button and the
CALC_CLEAN
button while switching on the machine.
Once entered the machine shows Led Descale and Led Rinsing flashing in series .
If there is a failure on NTC (Ntc disconnected or in short circuit) the operation cannot be per-
formed and the
LED General Alarm will blink
(turn off the machine and repair before do
Steam-out operation).
If Door is opened or drag drawer is removed LED WASTE FULL will be switched on . To start
again the
operation insert drag drawer and close service door.
At the end of procedure LED ESPRESSO and LED COFFEE turns on.
When the Steam-Out is complete the following parameters are resetted to their default values:
• Length Espresso product
• Length Coffee product
• Stand-By Time
• Count Coffee (Ground counter)
• The request for Priming the Circuit at the first switch on is set.
• Aroma
• Aroma Impulses
• Filter Presence
• Filter Pulses
• Dynamic threshold
• History of grindings for Beans Presence detection