Philips 3000 series Service Manual Download Page 55

Page: 55 / 79

PHILIPS 4000 and 3000 05 SERVICE MODE

14/18

Press the Espresso button to move BU to work

Action by user

LED INDICATION

Led

NoBeans

Led

NoWater

Led

GenAlarm

Led Dreg

drawer full

When the BU reaches the work position the Led NoBeans

is switched on

ERROR: Led NoBeans remains off, Check the work mi

croswitch (broken?), the BU motor (blocked?) and the wi

ring (JP16).

ERROR: led GenAlarm Switch ON; the absorbed current

is much more 300mA (with BU) or 200mA (without BU)

check the BU and the motor

Press the Coffee button to move BU to home

Action by user

LED INDICATION

Led

NoBeans

Led

NoWater

Led

GenAlarm

Led Dreg

drawer full

When the BU reaches the home position the Led NoBeans

is switched on

ERROR: Led NoBeans remains off, Check the work mi

croswitch (broken?), the BU motor (blocked?) and the wi

ring (JP16).

ERROR: led GenAlarm Switch ON; the absorbed current

is much more 300mA (with BU) or 200mA (without BU)

check the BU and the motor

Finish condition:

With BU, Drag Drawer,

door closed

LED INDICATION

Led

NoBeans

Led

NoWater

Led

GenAlarm

Led Dreg

drawer full

OFF

Level 4 (Pump)

Start condition:

BU not inserted, Drag drawer and

service door closed, no water sensor

LED INDICATION

Led

NoBeans

Led

NoWater

Led

GenAlarm

Led Dreg

drawer full

OFF

If the Dreg drawer is not inserted or the Service door is

not closed the EV cannot be opened and test cannot be

performed. If these 2 inputs are not in the right position,

Led Dreg drawer full will be RED

Start condition:

NO BU, Drag drawer, door

Closed and No Water sensor

LED INDICATION

Led

NoBeans

Led

NoWater

Led

GenAlarm

Led Dreg

drawer full

OFF

If the Dreg drawer is not inserted or the Service door is

not closed the BU test cannot be performed. If these 2

inputs are not in the right position, Led Dreg drawer full

will be RED

Level 3 (Brewing unit)

Press BUTTON Stand-By to move to the next screen

Summary of Contents for 3000 series
















































































Search results

Summary of Contents for 3000 series

Reviews:

Philips 3000 series, Service Manual, Page: 55 / 79

Search results

Summary of Contents for 3000 series

Reviews: