34
Use a Conditional Access
Module
A Conditional Access Module (CAM) is
provided by digital TV service operators to
decode digital TV channels.
Note
If required, refer to documentation from your
•
operator on how to insert a smart card into
the Conditional Access Module.
Insert and activate a CAM
Caution
Be sure to follow the instructions described
•
below. Wrong insertion of a CAM may
damage both the CAM and your TV.
1
Switch off the TV.
2
Following the directions printed on the
CAM, gently insert the CAM into the
COMMON INTERFACE
at the side of
the TV.
3
Push the CAM in as far as it will go.
4
Turn on the TV and wait for the CAM
to be activated. This may take several
minutes. Do not remove the CAM from
the slot when in use — removing the
CAM will deactivate digital services.
Access CAM services
1
After inserting and activating the CAM,
press (
Home
).
•
DVI-HDMI cable
•
HDMI cable and HDMI-DVI adaptor
•
VGA cable
DVI
LEFT / RIGHT
HDMI 1/ DVI
AUDIO IN :
PC IN(AUDIO)
For TV of size 26 inch and larger
For TV of size 22 inch and smaller
HDMI 2/ DVI
/ HDMI 2
VGA
DVI
/ HDMI 2
LEFT / RIGHT
HDMI 1/ DVI
AUDIO IN :
PC IN(AUDIO)
For TV of size 26 inch and larger
HDMI 2/ DVI
VGA
For TV of size 22 inch and smaller
VGA
VGA
LEFT / RIGHT
HDMI 1/ DVI
AUDIO IN :
PC IN(AUDIO)
For TV of size 26 inch and larger
HDMI 2/ DVI
VGA
For TV of size 22 inch and smaller
EN
