25
Start a TV demo
1
Press
DEMO
on the remote control.
2
Press to select a demo and press
OK
to view it.
3
Press
DEMO
to exit.
Reset the TV to factory
settings
You can restore the default picture and sound
settings of your TV. Channel installation settings
remain the same.
1
Press (
Home
).
2
Press
to select
[Setup]
>
[Installation]
>
[Factory settings]
.
3
Press
OK
or to enter the
[Factory
settings]
menu.
A factory setting message appears.
»
4
Select
[Reset]
to start resetting.
5
Press (
Home
) to exit.
•
[Teletext 2.5]
Enables or disables
Teletext 2.5.
•
[E-sticker]
For shop mode only. Sets
the location of the e-sticker.
Access decoder channel
You can map channels provided through a
decoder or descrambler to your TV channel
selection. In this way, you can select these
channels by using the RC of your TV. The
decoder or a descrambler must be connected
to EXT1 (SCART).
Set decoder channel
Map channels from a decoder or descrambler
1
Press (
Home
).
2
Press
to select
[Setup]
>
[Installation]
>
[Decoder]
.
3
Press
OK
or to enter
[Decoder]
menu
.
4
Press to select
[Channel]
and press
OK
or to enter.
A list of analogue channels appears on
»
the screen.
5
Press to select one channel to map
to the decoder/descrambler channel and
press
OK
to confirm.
6
Select
[Status]
and press
OK
or to
enter.
7
Press to select
[EXT 1]
(SCART)
the connector used by the decoder/
descrambler.
8
Press
OK
.
9
Press (
Home
) to exit.
English
EN
