Philips 20MC4304, Service Manual

Page: 99 / 316

1-8-1 T1006DC
CABINET DISASSEMBLY INSTRUCTIONS
1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts, and the CBA in order to gain access to
item(s) to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
Caution!
When removing the CRT, be sure to discharge the
Anode Lead of the CRT with the CRT Ground Wire
before removing the Anode Cap.
2. Disassembly Method
(1): Order of steps in Procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in Figures.
(2): Parts to be removed or installed.
(3): Fig. No. showing Procedure of Part Location.
(4): Identification of part to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
S=Screw, P=Spring, L=Locking Tab, CN=Connec-
tor, *=Unhook, Unlock, Release, Unplug, or Desol-
der
2(S-2) = two Screws (S-2)
(5): Refer to the following "Reference Notes in the
Table."
ID/
LOC.
No.
PART
REMOVAL
Fig.
No.
REMOVE/
*UNHOOK/UNLOCK/
RELEASE/UNPLUG/
DESOLDER
Note
[1]
Rear
Cabinet
1 4(S-1), (S-2), 2(S-3) -
[2]
Tray
Chassis
Unit
2, 3,
5
Anode Cap, *CN501A,
CRT CBA, *CN571,
*CN601, *CN802,
*CN1801
1
[3] CRT 3, 5 4(S-4), *CL501A -
[4] DVD Unit 2, 5
4(S-5), *CN1601,
*CN1602
-
[5]
DVD Main
CBA Unit 2, 4,
5
(S-6), (S-7), 2(S-8),
2(S-9), *CN201,
*CN301,
Loader Shield Top
2
2-1
2-2
2-3
2-4
3
[6]
DVD
Mechanism 2, 4,
5 (S-10),
Loader Shield Bottom
2
[7] Sub CBA 2, 5
6(S-11), *CN301,
*CN602
-
[1] Rear Cabinet
[3] CRT [2] Tray Chassis Unit
[4] DVD Unit
[5] DVD Main
CBA Unit
[6] DVD
Mechanism
[7] Sub CBA
[9] Deck Assembly
[10] Main CBA
[8] Function CBA
[8]
Function
CBA
2, 5 2(S-12), *CN803 -
[9]
Deck
Assembly
2, 5
3(S-13), 7(S-14),
(S-15), (S-16),
Top Shield, *CL201,
*CL401, *CL402,
*CL403
4
[10] Main CBA 2 5(S-17) -
↓
(1)
↓
(2)
↓
(3)
↓
(4)
↓
(5)
ID/
LOC.
No.
PART
REMOVAL
Fig.
No.
REMOVE/
*UNHOOK/UNLOCK/
RELEASE/UNPLUG/
DESOLDER
Note