GENERAL PRODUCT SPECIFICATION
14" CM2300 GS-III CMTR
TYPE
: 104S11/89 (COCA)
BRAND : PHILIPS (54K)
8639 000 10477
00-02-18
00-02-18
590
10
25
Wiliam Ou
56
104S CM23 GSIII
3.9
Phosphor protection
The display device is sufficiently protected against the burning of phosphors in
case of repetitive power cycling or absence of horizontal deflection.
3.10
Low emission requirements (MPR-II )
-----------------------------------------------
Items
Band I
Band I I
ELF (rms)
VLF (rms)
Alternating Electric MPR -II < 25 V/M MPR-II < 2.5V/M
Field
Magnetic Field
MPR-II < 250 nT
MPR-II < 25 nT
Electrostatic
Potential
<
±
500 V
Band I : 5 to 2K HZ.
Band II : 2K to 400K HZ.
Test procedure according to MPR-II and E.S.P. test method.
3.11
Display data channel : DDC1/2B (VESA STANDARD)
The DDC HEX Data (refer sheet 190) should be written into the
DDC IC (24LC21 or equivalent) Hard ware DDC or EEPROM page 2 , 0 ~ 127 bytes
(Soft ware DDC) by EEPROM writer or equivalent method.
4.0
Display image (CRT facing east)
The monitor is aligned in a magnetic cage having the
following magnetic field components :
Northern Hemisphere : H = 0, V = 450 mG, Z = 0
Southern Hemisphere : H = 0, V = -500 mG, Z = 0
Conditions for visual testing, unless otherwise stated:
Input video signal
- 700 mVpp cross hatch
Brightness control
- center click position
Contrast control
- maximum position
4.1
Display resolutions
See 3.1.3
4.2
Image size (For preset modes only)
The dimensions of guaranteed display area to be measured along the picture center of
horizontal and vertical axis of the screen as listed below: (preset modes only, refer
to fig. 1)
Width
: 250
±
3 mm
Height
:188
±
3 mm
