59
104S CM23 GSIII
GENERAL PRODUCT SPECIFICATION
14" CM2300 GS-III CMTR
TYPE
: 104S11/89 (COCA)
BRAND : PHILIPS (54K)
8639 000 10477
00-02-18
00-02-18
590
13
25
Wiliam Ou
4.12
Color tracking on full white pattern
To adjust the luminance output from 3 to 30 FL. By turning the contrast control
(brightness control at center click position),
the color co-ordinates should not deviate more than the following tolerance when
compare to display center:
X= X (center)
±
0.015
Y= Y (center)
±
0.015
4.13
Purity
Test patterns : Full white / Red / Green / Blue.
Conditions : As stated in item 4.0, the purity must be checked under specific
destinations of earth magnetic environments and the monitor
to be well degaussed.
After warming-up time of 30 min. , no color stains may occur in above four patterns.
4.14
Moire’e
Condition: Displaying a full white pattern, at any preset mode ,
the display size to be set as Fig.1
The clouding effect must not rise to disturbing levels in anywhere of the screen with
luminance setting from 15 to 35 FL.
4.15
Blemish
Blemish shall be in accordance with CRT specification.
5.0
Mechanical characteristics
5.1
User controls
- Power ON/OFF switch
- Contrast
- Brightness
Digital control buttons :
- Shift function ( function select of 1st and 2nd level controls)
- 1st level : H-Shift , H-Size , V-Shift , V-Size
- 2nd level : Trapezoid , Pincushion , Recall (Store)
(H-Shift) (H-Size) (V-Size)
- ”+” or “-” key : Increase or decrease setting
- H-Shift + V-Size : Factory mode entry. At Power on, simult aneously pressed
3 seconds, shift LED will flash 3 times.
* Power off/on return to user mode
