12
104S CM23 GSIII
Instructions for Alignment KIT
In "MS DOS environment", make a sub-directory "I2C-200" in your Hard Disk "C",
then copy "I2C-200.EXE" and "I2C-200.R00" into your sub-directory.
1. C:\MD I2C-200 , press "Enter"
2. C:\CD I2C-200 , press "Enter"
Bring up --> C:\I2C-200>
3. Insert disk 1 (I2C-200.EXE) into Drive A
4. C:\I2C-200>COPY A:\I2C-200.EXE , press "Enter"
5. Take disk 1 out from Drive A
6. Put disk 2 (I2C-200.R00) into Drive A
7. C:\I2C-200>COPY A:\I2C-200.R00 , press "Enter"
8. C:\I2C-200>I2C-200 , press "Enter"
In "MS Windows 95" environment:
1. Open: C:\I2C-200\Setup.exe
(As Fig. 1)
2. Click "OK" of Fig.1, bring up "Fig. 2"
3. Click "OK" of Fig. 2, bring up "Fig. 3"
4. Click "ICON" of Fig. 3, bring up "Fig. 4"
5. Click "OK" of Fig. 4, bring up "Fig. 5"
6. Double-click "ICON
" of Fig. 5 to bring up
Main Menu of CPU controller as "Fig. 6".
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 6
Fig. 5
1. Click the "Options", and then
point to "Command code setup..."
2. Click "Command code setup",
bring up Fig. 7.
