57
104S CM23 GSIII
GENERAL PRODUCT SPECIFICATION
14" CM2300 GS-III CMTR
TYPE
: 104S11/89 (COCA)
BRAND : PHILIPS (54K)
8639 000 10477
00-02-18
00-02-18
590
11
25
Wiliam Ou
4.3
Image centering deviation (For preset modes only)
With respect to fig. 2, the target relationships are
the following :
|A- B|
£
6 mm
|C- D|
£
6 mm
Note : This centering is adjustable by the end-user.
4.4
Picture shift control range (For preset modes only)
H-shift range :
±
10 mm min.
V-shift range :
±
8 mm min.
4.5
Picture tilt
With respect to Fig. 3, Tilt to be measured on extremes of center line from bezel.
|A- B|
:
£
2 mm
4.6
Geometrical distortions (For preset modes only)
It is acceptable that pincushion, trapezoid, rhomboid,
rotation and various waves distortions must remain within
the limits of tolerance as in fig. 4,
where A = B = 3.0 mm. A+B <5 mm
C = D = 3.0 mm. C+D <5 mm
The waviness of any vertical or horizontal shall be less than 1.0 mm over a 50 mm distance.
4.7
Image non-linearity pattern with
12 equal blocks along horizontal axis,
9 equal blocks along vertical axis. (see Fig. 1) (For preset modes only)
Overall
:
£
10 % (each horizontal and vertical)
Deviation of Two adjacent block :
£
6 %
X. Max. -
X. ave.
H. non-linearity =
x 100%
X. Max.
Y. Max. -
Y. ave.
V. non-linearity =
x 100%
Y. Max.
