8
Specification
Operating Voltage
100 ~240VAC /50Hz/60Hz
Maximum Load
11A (Resistive load)
Range
Minimum 40 m in door 100m outdoor line of sight
Operating Temperature
0°C ~ 40°C
Frequency Range
PAN03-1: 868.40MHz; 869.85MHz(EU) /
PAN03-2: 908.40MHz; 916.00MHz(USA/Canada) /
PAN03-3: 922.5MHz/ 923.9MHz/ 926.3MHz (Taiwan/JP)
PAN03-IL: 916.00MHz(Israel)
PAN10-1: 868.40MHz; 869.85MHz(EU) /
PAN10-2: 908.40MHz; 916.00MHz(USA/Canada) /
PAN10-3: 922.5MHz/ 923.9MHz/ 926.3MHz (Taiwan/JP)
PAN10-IL: 916.00MHz(Israel)
** Specifications are subject to change and improvement without notice.
FCC ID : RHHPAN03
DANGER
Danger of electrocution!
All works on the device may be performed only by a qualified and licensed electrician.
Observe national regulations.
Any works introducing changes into the configuration must be always performed with
disconnected voltage.
Choosing a Suitable Location
1. Do not locate the Module facing direct sunlight, humid or dusty place.
2. The suitable ambient temperature for the Module is 0°C~40°C.
3. Do not locate the Module where exists combustible substances or any source of
heat, e.g. fires, radiators, boiler etc.
4. After putting it into use, the body of Module will become a little bit hot of which
phenomenon is normal.
Warning:
1. Plug out to disconnect from power supply; Do not plug in line.
2. Do not exceed the max rating
Disposal
This marking indicates that this product should not be disposed with
other household wastes throughout the EU. To prevent possible harm to
the environment or human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return and
collection systems or contact the retailer where the product was
purchased. They can take this product for environmental safe recycling.
Company of License Holder
：
Philio Technology Corporation
Address of License Holder
：
8F.,No.653-2,Zhongzheng Rd., Xinzhuang Dist., New
Taipei City 24257,Taiwan(R.O.C)
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to
radio communications.
