
Figure
7
Include a new device
PS: In the including procedure, you may saw the “Report Form” pop
up. More information of the “Report Form”, please refer to the “
8
Report Form”
.
3.2. Exclude Device
Remove the Z-Wave device from the Z-Wave network, the controller should
exclude it.
To execute the exclusion operation, please press the “Exclude” button.
The all buttons of the main function part will be disabled. And the
controller will into to the exclusion mode. If you want to abort the
exclude operation, please press the “Abort” button in the controller
function part.
Figure 8 Controller into exclusion mode
Now remove the device from the controller, press the learning key
three times. If the controller got the message, the controller will
remove it.
The all buttons of the main function part will recover, and in the device
list part will remove that device record. The message part will show a
device was removed, and which node id it is.
Figure
9
Exclude a device
7