1.2
Install Application
Extract the “PhilioZWaveUtil.7z” to the folder whatever you want, but
please don’t install on the remote disk, it may cause some error.
Insert the dongle into the PC USB socket. And then execute the
“PhilioZWaveUtil.exe” to start the application.
Note: This tool is designed by .Net Framework, you need to install .Net
Framework 4.0 before running the application. You can easily use the
“Windows Update” to install that. Windows 7 already install .Net
Framework in default.
2. Start
Insert the USB dongle, and execute the “PhilioZWaveUtil.exe” to start
the application. If the application can’t find the USB dongle, it will
show the pop window, and click the OK button to close the application.
Figure
1
USB dongle not found
Normally, the application will read controller information from the USB
dongle; you can see the progress bar is running.
Figure
2
Reading the information of the controller
After finish, it will show the basic information of the dongle.
4