Copyright © 2020, Fast ČR, a. s.
Revision 12/2021
EN - 14
PART 5: LOADING YOUR DISHWASHER
For best results, follow these loading guidelines.
Loading the household dishwasher up to the
capacity indicated by the manufacturer will
contribute to energy and water savings.
Manual pre-rinsing of tableware items leads to
increased water and energy consumption and is
not recommended You can place cups, glasses,
stemware, small plates, bowls, etc. in upper basket.
Do not lean long glasses against one another or they
cannot remain steady and may receive damage.
When placing long stem glasses and goblets, lean
them against the basket edge or rack and not
against other items.
Place all containers such as cups, glasses and
pots into the dishwasher with the opening facing
downwards otherwise water can collect on items.
If there is cutlery basket in machine, you are
recommended to use the cutlery grid in order to
obtain the best result. Place all large (pots, pans, lids,
plates, bowls etc.) and very dirty items in the lower
rack.
Dishes and cutlery should not be placed above each
other.
WARNING!
Take care not to obstruct the rotation of spray
arms.
WARNING!
Make sure after loading the dishes do not prevent
opening the detergent dispenser.
Recommendations
Remove any coarse residue on dishes before placing
the dishes in the machine. Start the machine with
full load.
NOTE:
Do not overload the drawers or place dishes in the
wrong basket.
WARNING!
To avoid any possible injuries, place long-handle
and sharppointed knives with their sharp points
facing down or horizontally on the baskets.
