Copyright © 2020, Fast ČR, a. s.
Revision 12/2021
EN - 21
PART 8: CLEANING AND MAINTENANCE
Cleaning your dishwasher is important to maintain
the machine’s service life Make sure that the water
softening setting (If available) is done correctly and
correct amount of detergent is used to prevent
limescale accumulation. Refill the salt compartment
when the salt sensor light comes on.
Oil and limescale may build up in your Dishwasher
over time. If this occurs:
• Fill the detergent compartment but do not load
any dishes. Select a programme which runs
at high temperature and run the Dishwasher
empty. If this does not clean your Dishwasher
sufficiently, use a cleaning agent designed for
use with dishwashers.
• To extend the life of your dishwasher, clean the
appliance regularly on each month
• Wipe the door seals regularly with a damp cloth
to remove any accumulated residue or foreign
objects.
Filters
Clean the filters and spray arms at least once a week.
If any food waste remains or foreign objects on the
coarse and fine filters, remove them and clean them
thoroughly with water.
a)
Micro Filter
b)
Coarse Filter
c)
Metal Filter
D
F
E
To remove and clean the filter combination, turn it
counter clockwise and remove it by lifting it upwards
(
1
). Pull the coarse filter out of the micro filter (
2
).
Then pull and remove the metal filter (
3
). Rinse the
filter with lots of water until it is free of residue.
Reassemble the filters. Replace the filter insert, and
rotate it clockwise (
4
).
• Never use your dishwasher without a filter.
• Incorrect fitting of the filter will reduce the
washing effectiveness.
• Clean filters are necessary for proper running of
the machine.
Spray arms
Make sure that the spray holes are not clogged and
that no food waste or foreign object is stuck to the
spray arms. If there is any clogging,remove the spray
arms and clean them under water. To remove the
upper spray arm undo the nut holding it in position
by turning it clockwise and pulling it downwards.
Make sure that the nut is properly tightened when
refitting the upper spray arm.
