Copyright © 2020, Fast ČR, a. s.
Revision 12/2021
EN - 6
PART 3: INSTALLING THE MACHINE
Machine positioning
When positioning the machine, place it in an area where dishes can be easily loaded and unloaded. Do not
put the machine in an area where the ambient temperature falls below 0°C.
Read all warnings located on the packaging before removing the packaging and positioning the machine.
Place the machine close to a water tap and drain. Take into consideration that the connections will not be
altered once the machine is in position.
Do not hold the machine by its door or panel.
Leave an adequate distance around the machine to allow ease of movement when cleaning.
Ensure the water inlet and outlet hoses are not squeezed or trapped and that the machine does not stand
on the electrical cable while positioning. Adjust the feet so the machine is level and balanced. The machine
should be placed on flat ground otherwise it will be unstable and the door of the machine will not close
properly.
Water connection
We recommend fitting a filter to your water inlet supply in order to prevent damage to your machine due
to contamination (sand, rust, etc.) from indoor plumbing. This will also help prevent yellowing and deposit
formation after washing.
Note printing on the water inlet hose!
If models are marked with 25°, the water temperature may be max. 25 °C (cold water).
For all other models:
Cold water preferred; hot water max. temperature 60 °C.
Water inlet hose
WARNING!
Use the new water inlet hose supplied with your machine, do not use an old machine’s hose.
