background image

EN - 11

 03/2012

Copyright © 2012, Fast ČR, a. s.

PART 4: CONTROL PANEL 

Control panel

10. 9. 

8.

1. 2. 

3. 

4. 

5. 6. 7.

1. 

ON/OFF button:

 Turning on/off  power to the appliance. After turning on, the Start/Standby indicator light 

will come on.

2. 

Half dish load button:

 by using the half dish load function you can reduce the washing cycle time and 

reduce water and electricity consumption. 

3. 

Tablet button:

 use this if you are using 3-in-1 tablets containing washing detergent, salt, rinsing aid.

4. 

Handle

5. 

Program button:

 Press the button to select a desired program.

6. 

Additional rinse button:

 activate the additional rinse function for a selected program. 

 

If you select the additional rinse function the additional rinse indicator light will light up in the top left 
corner of the display. The additional rinse function will be added to the selected program. This will make 
the dishes cleaner and shinier. 

7. 

Start/Pause button:

 press this button to start the washing cycle selected using the program button. The 

washing indicator light will turn on. In the off  state the indicator light will fl ash. 

8. 

Salt warning indicator light:

 It will light up if salt needs to be refi lled.

 

Rinsing aid warning indicator light:

 It will light up if rinsing aid needs to be refi lled.

NOTE:
The washing program that was set previously will remain in the dishwasher‘s memory. Before turning on 
the dishwasher again, check that you have selected the correct washing program. 

9. 

Washing cycle progress indicator:

 the individual indicator lights will turn on at the relevant stages of the 

washing cycle. 

 

Wash – washing

 

Dry – drying

 

End – end

10. 

Remaining time display:

 displays the time remaining until the end of the selected washing program. 

Furthermore, you can postpone the start of the selected washing cycle by pressing the +/- buttons before 
starting the washing cycle. If you wish to change the postponed start time, press the Start/Pause button 
and use the +/- buttons to change the time. Then press the Start/Pause button again. 

Child lock function

To prevent buttons from being pressed accidentally, it is possible to activate the child lock function. Hold down 
the + and – buttons at the same time for 3 seconds. The display will show „CL“ for approximately 2 seconds. 
To cancel the child lock function hold down the + and – buttons at the same time for 3 seconds. „CL“ will fl ash 
once on the display.

Summary of Contents for PD 1070





































Reviews: