EN - 10
03/2012
Copyright © 2012, Fast ČR, a. s.
WARNING!
After removing the cover, all rigid parts must remain stable to ensure balance.
After removing the cover it will be necessary to level the dishwasher to ensure correct balance.
After connecting the inlet and drain hoses, slide the dishwasher into the installation area. Take care not to
damage, crimp, bend or otherwise impair any of the hoses.
WARNING!
Only remove the top cover if it is absolutely necessary for the installation into the built-in area.
The dimensions of some built-in areas may be higher and so the dishwasher will fi t in with the top
cover attached.
Turning on the dishwasher
Before turning on the dishwasher, check the recommendation below.
The dishwasher is levelled and properly seated.
Is the inlet valve opened?
Joints do not leak in the connection points.
Cables are properly connected.
Is the power source turned on?
The water supply hose and the drain hose are not knotted up.
You have removed all packaging material and all printed materials.
