6.5 Tools and Materials Required
Tools required before installing the wall connector, gather the following tools:
●
Pencil or marker
●
Hole punch (optional, to push through cardboard template)
●
Wire stripper
●
Voltmeter or digital multimeter (to measure AC voltage at the installation site)
●
Phillips screwdriver
●
T8 Torx driver
●
Cable Gland information:
1. The AC input cable through hole of Cable Gland is 13~18mm (0.5" ~0.7")
2. If currently cable glands is not suitable to used, please choose a suitable cable
glands.The AC input cable through hole of the EVSE is 28.5mm / 1
“
●
Ferrules (the diameter of the ferrule depends on the diameter of the power wiring
and the construction)
●
Wiring use cable 8AWG (Max diameter: 8.36 mm); Max cross-sectional area:
8.36mm² for a maximum of 15 m between Wall Connectors.
●
Level
●
Machine drill
8
1
8
